Comp cams

...comp wiring: painless paint: 2003 corvette torch red (no paint flaws) additionally: all braided stainless steel hoses, electric cooling fan...

...comp wiring: painless paint: 2003 corvette torch red additionally: all braided stainless steel hoses, electric cooling fan, optima battery...

...is provided by a replacement 427ci V8 with modifications that include an Edelbrock Performer RPM intake manifold and cylinder heads, a Comp...

...350ci V8 that was machined and assembled by Wayne’s Engine Rebuilders. Equipment includes an Edelbrock four-barrel carburetor, a Comp...

...Comp Cams roller cam, and solid lifters. It inhales deeply through a Demon double-pumper four-barrel carburetor and Merlin aluminum intake.

...cams set up). Ceramic coated headers and a completely new 2 1/2 exhaust system w/Flow master mufflers. Ignition is an HEI unit with a 2-wire...

...has not been setup. The fuel and everything else has been. The car has been tuned by a guy at Comp Cams. Runs great and sounds amazing.

...cams set up). Ceramic coated headers and a completely new 2 1/2 exhaust system w/Flow master mufflers. Ignition is an HEI unit with a 2-wire...

...The engine has a 1972 400 block, bored 30 over, 440 crank, eagle rods, ross forged pistons, 452 heads, edelbrock intake and carburetor, comp...

...a block sourced from a contemporary Catalina. The engine was overbored and fitted with Keith Black pistons, Eagle H-beam connecting rods, a COMP...

...and rebuilt with forged TRW 11.1 pistons and upgraded stainless valves. In 2017 the next owner after restoration upgraded the cam to a Comp...

...Cams. 468 lift camshaft installed. This beautiful blue mill also has a high flow intake courtesy of Edelbrock and a Road Demon 725cfm...

5.0L 302 Windsor V8. 69 Heads with COMP cams. Holley 650 carb. One billet belt drive. MDS ignition. AFCO aluminum radiator with cooling fan...

...Cams H-107 Thumper hydraulic camshaft, a Holley Sniper fuel injection system, Edelbrock Performer RPM aluminum intake manifold, long tube...

...and Fuel Lines, Comp Cams Magnum Steel Camshaft, Weld Racing Wheels, Hydraulic Lifters, MSD Ifnition and Blaster Coil, Summit Racing Radiator

The 302ci was rebuilt and bored 0.030″-over during the refurbishment, at which time it was fitted with a Comp Cams camshaft, an Edelbrock...

...inch stroke, with viton silicone rear main seal, ram air iv cam, mellings 80psi oil pump, rocker arm poly-locks, new harmonic balancer, comp...

...Cams Cam & Hydraulic lifters, hardened pushrods, Scorpion roller rockers, Cam bearings, and M55HV oil pump. Additionally all gaskets have...

...1150 cfm Carb Jesel Rocker Arms JE pistons Manley Aluminum rods Callies 4340 Crankshaft Jesel Belt Drive MSD Crank Trigger and Distributor Comp...

...Cams belt drive. Morel Lifter. Strange Rear Chuck. (through bolt 4.56). T&D Rockers. Pro Filer Heads (flow 470 cfm). Pro-Filer Intake...

...a Comp Cams roller camshaft, Edelbrock cylinder heads, TTi Performance headers, an American Powertrain shifter, and a Quicktime bellhousing.

The 6.0-liter LY6 V8, which was subsequently modified with a COMP Cams performance camshaft and valve springs, upgraded rocker trunnions, an...

...car. ENGINE 550ci Hemi, World alloy block, custom CP forged pistons, 9.0:1 compression, Ohio forged crankshaft, Oliver steel race rods, Comp...

...cylinder heads, custom Ed Curtis hyd roller camshaft, trickflow box R upper and lower intake, wilsons manifolds 90mm throttle body, 1.6 comp...

...interior, AC, suspension, paint. Fresh. 030 over 109 block New Eagle steel crank Billet center main caps New stock rods Forged TRW pistons Comp...