Rod

...4 Speed Automatic Drivetrain: RWD Engine: 383 V8 Mileage: 12,335 Striking Chevy Custom Pickup Street Rod 383 V8 700R4 4-speed PS PB A/C Leather

...rod bearings and a valve adjustment prior to installation. Additional modifications include an ARC Asylum oil pan, a Mishimoto radiator, and...

...resealing the power steering gearbox along with replacement of the drag links, steering shock absorber, subframe mounts, and two tie rod...

...rod bearings were replaced in October 2004, and an oil change was performed in preparation for the sale. The Dinan rear exhaust system is...

...springs, Ireland Engineering sway bars, and polyurethane bushings. Additional work during refurbishment included replacement of the track rod...

...The suspension was lowered and aftermarket shocks, torsion bars, and adjustable tie rod ends are said to be fitted. Service during current o.

...rod ends, Bushings, Steering Components and Stabilizer. Finishing off the stance are Factory 15 inch Rally Wheels wrapped in New 35x12.5...

...rod ends, 28mm rear torsion bars, a 22mm front sway bar, and Weltmeister adjustable rear sway bar. Braking is handled by discs at all four...

...on Mustang II-spec independent front suspension with TCI front and rear sway bars along with front springs and dropped spindles from JW Rod...

...rod bearings shortly after the seller’s acquisition due to piston ring damage in cylinder number three. It is said to feature a 2.0L 911S...

...rod bearing recall was performed in September 2005, and the mass air flow sensor, fuel pressure regulator, exhaust cam sensor, and fuel level...

...225/50 rear Continental ExtremeContact tires. The tie rod ends, brake hoses, and brake fluid were also changed and the suspension was adjusted.

...rod ends, steering rack, column bushings and four shock absorbers. The brake system was also overhauled with new calipers, rotors, lines, and...

...Florida in 2016. An oil change was performed in preparation for the sale, and a VANOS anti-rattle kit was installed along with replacement rod...

...trunk lid. Superlite 15″ wheels with black centers and polished lips are mounted with 205/60 Yokohama AS530 tires. The steering rack, tie-rod...

...tie-rod ends. The interior is finished in Cashmere tan and is complemented by matching carpets and a two-tone dashboard and door panels...

...tire is mounted in the rear cargo area. Work performed under current ownership reportedly included replacing the brake master cylinder, tie rod...

The car was modified in the spirit of a 1950s street rod, and the work was reportedly performed by Little Dearborn Ford Parts in Minneapolis...

1935 HOT ROD HUDSONCall Hawk 210-548-1---Here is one neat looking car. This is a 1935 Hudson Terraplane Business Coupe. The body is original...

...striping on the roof, rear pillars, and tailgate. The custom roof design was reportedly completed using House of Kolor paint in a mix of hot rod...

...rod bearing recall was carried out by BMW of San Francisco in April 2007. Power is sent to the rear wheels through a six-speed manual...

...by the seller. Work carried out under previous ownership included replacing the front axle seals as well as the spindle bearings, tie-rod...

...rod on the original engine. Features include a Dinan Stage 1 tune and strut tower brace, and the seller states that an oil change was...

...coil springs up front and a transverse leaf spring in the rear. Service in 2021 included replacing the ball joints, tie rod ends, front an.

1972 Porsche 911 T Hotrod 25630 Miles 1972 Porsche 911T Hotrod Build list is as follows. Porsche 993 3.6L Motor Pauter Rod set Mahle...